Исправлен вылет при поиске подключаемых устройств.
The program is designed to display the inspection results of ultrasonic flaw detectors series "SKARUCH" with built-in Bluetooth module.
The display of results is possible in modes:
* automatic flaw detector
* manual flaw detector
* manual thickness gauge
In auto mode, the repeater displays the mnemonic of inspection results, coordinate scale and 16 bands with channel-by-channel maximum signal in the gate scans.
In manual mode the detector displays A-scan, maximum signal in gate scan, position and echo signal time delay of the detected defect, the scan and the gate current settings, signal amplification and the mode of operation of the flaw detector.
Manual thickness gauge mode is similar to the manual mode of the detector, except the separate display of measured thickness.
In addition to displaying the results of the monitoring, the program synchronously repeats all changes the settings of the instrument, and the transition from one measurement mode to another.
Requirements for the program:
* Ultrasonic flaw detector "Skaruch" modification with built-in Bluetooth
* Device equipped with Bluetooth and android 2.0 or higher
