Fix sdk 29
Remote control for IPBOX DGS Station CubeRevo
This remote control is useful for managing remotely decoder IPBOX with SifTeam image or any other image DGS.
App is useful to use this to access the decoder when it is placed in an other room. The classic situation is when the signal from the decoder IPBOX is distributed to all TVs in your house through the terrestrial antenna cable. Therefore you need to change the channel or interact with the decoder from different parts of the house. If your smartphone and your decoder is connected to your home network everything will work fine
The app consists of four pages that run laterally from right to left and vice versa, the pages are:
Keyboard
Remote Control
Channel List
Settings
First of all you need to enter the IP address in the Settings page of the decoder, the username and password used to access the web page for remote configuration of the decoder IPBOX and press the Save button. Council in this regard configure your IPBOX with a static network address so you always know what the App will find the address decoder.
Features:
This App allows you to interact with the decoder either manually or with voice commands to perform any operation as the original remote.
The Voice Command Voice is available by pressing the red button. The commands recognized by the decoder are:
OK
menu '
Exit
salts
Go down
right
left
stop
The app reads the list of channels like created ipbox decoder and serves as a list of channels, with the ability to scroll the list upward and down and then choose the desired channel by pressing the name will almost instantly change the channel .
After choosing the channel by pressing the Get Info button displays the description of the program broadcast on the selected channel by pressing Return will return to the channel list. Close button closes the channel list.
Log:
Fixed layout compatibility with Tablet
